S&S 585GE Easy-Start Gear Drive Camshaft Kit (330-0303)

Description

• Start any engine regardless of displacement or compression ratio with a stock starter
• Save your starter and battery; tested for 10,000 starts without running battery down
• Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
• All gear-drive cams include 4-gear set and installation kit
• S&S .585 inch lift cams are designed for 88 to 96 inch engines with compression ratios from 10 to 10.5:1 and 100 and 107 inch engines at 9.7:1 to 10.5:1 compression
• This 585GE Gear Drive Easy Start cam is designed to greatly improve valve timing accuracy by eliminating timing chain lash and Easy Start Cams allow stock starter to start any engine
• For 88/95/96/103 cubic-inch engines
• Intake open/Intake close: 13/33
• Intake lift/Intake duration: 0.585″/226
• Exhaust open/Exhaust close: 50/22
• Exhaust lift/Exhaust duration: 0.585″/252
• Compression ratios below 10:1
• Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance
• Due to the inherent characteristics of gear drives, you may experience more valve train noise
• Not for models with OEM compression releases
• Complete kit includes cams with inner gears and installation kit. Can be used with stock valve springs
• For ’06 Dyna & 2007-’16 big twins
• Made in the U.S.A.